- ページ 13

ノートパソコン Dell Inspiron 1410のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 1410 36 ページ。

ページを印刷する

Back to Contents Page

Display

Dell™ Inspiron™ 1410 Service Manual

Display Assembly

Display Bezel

Display Panel

Display Panel Cable

Display Inverter

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Display Assembly

Removing the Display Assembly

1. Follow the instructions in

Before Working Inside Your Computer

2. Remove the memory module(s) (see

3. Remove the WLAN card (see

4. Remove the center control cover (see

5. Remove the keyboard (see

6. Remove the mylar tapes and then remove the two screws from the back of the computer.

NOTE:

Note how the display cable is routed through their routing guides.

7. Pull the display cable tab to disconnect the display cable from the system board connector.

8. Make note of the cable routing and carefully dislodge the WLAN antenna cables and the rest of the cables from their routing guides. Pull the cables

away, so that they are clear of the palm rest.

Removing the Memory

Module(s)).

Removing the WLAN

Card).

Removing the Center Control

Removing the

Keyboard).

Cover).