- ページ 7

ノートパソコン Dell Inspiron 5160のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 5160 43 ページ。 Dell inspiron 5160: quick start
Dell Inspiron 5160 にも： セットアップマニュアル (2 ページ)

ページを印刷する
Dell Inspiron 5160 サービスマニュアル
Back to Contents Page
  Microprocessor Module
Dell™ Inspiron™ 5160 Systems Service Manual
 

Removing the Microprocessor Module

 
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
Press and hold the microprocessor down by applying slight pressure to the center of the microprocessor while turning the cam screw to
prevent intermittent contact between the cam screw and microprocessor.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.
 
1. Follow the instructions in
"Preparing to Work Inside the
 
2. Remove the
hinge
cover.
 
3. Remove the keyboard.
 
4. Remove the
button board
and the
 
5. Remove the
display panel
and then remove the
 
6. Remove the
microprocessor thermal-cooling
NOTICE:
When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.
 
7. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw.
1 ZIF-socket cam screw
2 ZIF socket
3 microprocessor module
4 pin-1 corner of
microprocessor
5 triangle on system board
 
8. Use a microprocessor extraction tool to remove the microprocessor module.
 
Installing the Microprocessor Module
NOTICE:
Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in
the ZIF socket does not require force.
Computer."
EMI
shield.
palm
rest.
assembly.