- ページ 5

ノートパソコン Dell Inspiron 519のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 519 38 ページ。
Dell Inspiron 519 にも：サービスマニュアル (38 ページ)

ページを印刷する

3. Remove the screw holding the card retention bracket.

4. Lift the card retention bracket and set it aside in a secure place.

5. Remove the filler bracket to create a card-slot opening.

6. Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your

computer.

7. Align the card with the connector.

NOTE:

If you are installing a PCI Express card into the x16 connector, ensure that the securing slot is aligned with the securing tab.

PCI Express x16 card

PCI Express x1 card

PCI Express x16 card slot

8. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

alignment bar

not fully-seated card

bracket within slot

9. Replace the card retention bracket. See

NOTICE:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or

cause damage to the equipment.

10. Connect any cables that should be attached to the card.

See the documentation for the card for information about the card's cable connections.

11. Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

12. To complete the installation, see

Replacing the Card Retention Bracket

securing tab

PCI Express x1 card slot

fully-seated card

alignment guide

bracket caught outside of slot

Replacing the Card Retention

Configuring Your Computer After Removing or Installing a PCI/PCI Express

Bracket.

Card.