- ページ 28
ノートパソコン Dell Inspiron 5491のPDF セットアップおよび仕様マニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 5491 33 ページ。 Solid state drive
Dell Inspiron 5491 にも： セットアップおよび仕様マニュアル (37 ページ), セットアップと仕様 (20 ページ), インストレーション・マニュアル (15 ページ)
ページを印刷する
Option
Description
● Auto
Extended BIOS
Allows you to create an additional preboot delay. The options are:
POST Time
● 0 seconds. This option is enabled by default.
● 5 seconds
● 10 seconds
Full Screen Logo
This option will display full screen logo if your image match screen resolution
● Enable Full Screen Logo
Warnings and
This option will cause the boot process to only pause when warnings or errors are detected.
Error
● Prompt on Warnings and Errors This option is enabled by default.
● Continue on Warnings
● Continue on Warnings and Errors
Manageability
Option
Description
USB Provision
The option "Enable USB Provision" is not selected by default.
MEBx Hotkey
The option Enable MEBx Hotkey is selected by default.
Virtualization support screen options
Option
Description
Virtualization
Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology: This option is enabled by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O: This option is enabled by default.
Trusted
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
Execution
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution: This option is disabled by default.
Wireless screen options
Option
Description
Wireless Switch
Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
● WWAN
● GPS (on WWAN Module)
● WLAN
● Bluetooth
All the options are enabled by default.
28
System setup options
NOTE:
Error deemed critical to the operation of the system hardware will always halt the system.
NOTE:
For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled
or disabled independently.