- ページ 35

ノートパソコン Dell Inspiron 8600のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 8600 46 ページ。 Setting up your computer
Dell Inspiron 8600 にも：サービスマニュアル (42 ページ), セットアップマニュアル (2 ページ), サービスマニュアル (46 ページ)

ページを印刷する

1. Hard Drive

Back to Contents Page

Microprocessor Thermal-Cooling Assembly

Dell™ Inspiron™ 8500/8600 Service Manual

Removing the Microprocessor Thermal-Cooling Assembly

CAUTION:

Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

1. Follow the instructions in

"Preparing to Work Inside the

2. Remove the keyboard.

3. Remove the fan.

4. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system

board.

1 captive screws (4)

2 microprocessor thermal-

cooling assembly

5. Rotate the microprocessor thermal-cooling assembly up toward the side of the computer and away from the system board.

Computer."