- ページ 30
ノートパソコン Dell Latitude 3310 2-in-1のPDF セットアップと仕様をオンラインで閲覧またはダウンロードできます。Dell Latitude 3310 2-in-1 39 ページ。
ページを印刷する
Table 30. Power Management (continued)
Option
Block Sleep
Peak Shift
Advanced Battery
Charge Configuration
Primary Battery Charge
Configuration
Post behavior
Table 31. POST Behavior
Option
Adapter Warnings
Numlock Enable
Fn Lock Options
Fastboot
30
System setup
Description
This option lets you to block entering to sleep in operating system environment.
This option is not set by default.
Allows you enable of disable the Peak shift feature. This feature, when enabled, minimizes the AC
power usage at times of peak demand. Battery does not charge between the Peak Shift start and
end time.
Peak Shift Start and End Time can be configured for all weekdays.
This option sets the battery threshold value (15% to 100%)
This option enables you to maximize the battery health. By enabling this option, your system uses
the standard charging algorithm and other techniques, during the non-work hours, to improve the
battery health.
Advanced Battery Charge Mode can be configured for all weekdays.
Allows you to select the charging mode for the battery.
The options are:
● Adaptive—Default
● Standard - Fully charges your battery at a standard rate.
● ExpressCharge- The battery charges over a shorter period of time using Dell's fast charging
technology.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge
Stop.
NOTE:
All charging modes may not be available for all the batteries.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain
power adapters.
● Enable Adapter Warnings—Default
Allows you to enable or disable the Numlock function when the system boots.
● Enable Numlock—Default
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between
their standard and secondary functions. If you disable this option, you cannot dynamically toggle
the primary behavior of these keys.
● Fn Lock—Default
Click one of the following options:
● Lock Mode Disable/Standard—Default
● Lock Mode Enable/Secondary
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
● Minimal—Default
● Thorough