- ページ 9
ノートパソコン Dell Precision 5510のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell Precision 5510 42 ページ。
Dell Precision 5510 にも： オーナーズマニュアル (42 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (50 ページ)
ページを印刷する
Installing the Base Cover
1.
Place the base cover on the computer and snap it in place.
2.
Tighten the screws to secure the base cover to the computer.
NOTE: Ensure you use a Torx #5 screwdriver for the base screws and a Philips screwdriver for
the system badge screws.
3.
Turn the system badge flap over and snap it in place.
4.
Follow the procedures in After Working Inside Your Computer.
Removing the Battery
1.
Follow the procedures in
2.
Remove the
base
cover.
3.
Perform the following steps to remove the battery:
a. Disconnect the battery cable from the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift the battery off the computer [3].
Before Working Inside Your
Computer.
9