- ページ 15

インバーター ensol ES2V/2.0 ALのPDF インストール手順をオンラインで閲覧またはダウンロードできます。ensol ES2V/2.0 AL 20 ページ。 Flat solar collectors

4.4.3 montage of the Cover flashing

110mm

4.4.4 montage of the cover flashing

of the flat solar collectors models ES1V2.0, ES1V2.65,

Indication mark

Screws

Installation instruction

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

Affix the cover flashings at the front side of both

collectors. The indication mark at the cover

flashing has to be positioned at the outer side of

each collector. Use the coloured and sealed self-

tapping screws (4,2 x 13mm) at the provided holes

in each cover flashing. The overhang on the outer

sides is 110mm.

Between the collectors the overlap of the cover

flashings should be 23mm.

Clip the centre flashing between both

collectors. Fix the centre flashing at the

provided holes with one screw in the

middle and two screws at the lower end

(coloured and sealed self-tapping screws

4,2 x 13mm).