- ページ 20
ノートパソコン Dell Precision M3800のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell Precision M3800 42 ページ。 Notebook pc
Dell Precision M3800 にも: 仕様 (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (42 ページ)

b) touch panel
4. Perform the following steps to remove the power connector.
a) Release the power connector cable from under the display hinge [1].
b) Remove the screw that secures the power connector to the palmrest assembly.
c) Lift the power connector off the palmrest assembly [2].
Instalowanie gniazda zasilacza
1. Wkręć śrubę mocującą gniazdo zasilacza do zestawu podparcia dłoni.
2. Umieść kabel gniazda zasilacza pod zawiasem wyświetlacza.
3. Podłącz do płyty systemowej kable następujących urządzeń:
a) tabliczka dotykowa
b) gniazdo zasilacza
4. Zainstaluj następujące elementy:
a) akumulator
b) pokrywa dolna
5. Wykonaj procedury przedstawione w sekcji Po zakończeniu serwisowania komputera.
Removing the Input/Output (I/O) Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a) base cover
b) battery
c) WLAN card
d) coin-cell battery
3. Perform the following steps to remove the I/O board:
a) Disconnect the I/O board cable from the system board and the I/O board.
b) Disconnect the camera, fan, and coin-cell battery cables from the I/O board.
c) Remove the screws that secure the I/O board to the computer.
d) Lift the I/O board from the computer.
20
Wymontowywanie i instalowanie komponentów