- ページ 13

ノートパソコン Dell Studio 1536のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Studio 1536 42 ページ。 Dell laptop setup instruction
Dell Studio 1536 にも：セットアップマニュアル (2 ページ), サービスマニュアル (42 ページ)

ページを印刷する

NOTE:

The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.

When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the

others, the module is not seated properly.

1 ZIF-socket cam screw 2 ZIF socket

3 pin-1 corner

NOTICE:

To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

3. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.

4. Replace the processor thermal-cooling assembly (see

5. Replace the base cover (see

Back to Contents Page

Replacing the Processor Thermal-Cooling

Replacing the Base

Cover).

Assembly).