- ページ 2
ネットワーク・ルーター Cradlepoint AER 2100のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cradlepoint AER 2100 6 ページ。 Aer2100 series temporary, pop-up & mobile branch networking
Cradlepoint AER 2100 にも： スペックシート (8 ページ), クイック・スタート・マニュアル (6 ページ)
ページを印刷するQuick Start Guide
/
AER2100 Series
HARDWARE
2
LED Indicators
Power:
be powered using an approved 12V DC
power source.
+ Green = Powered ON
+ No Light = Not receiving power.
Check the power switch and the
power source connection.
+ Flashing Amber = Attention. Open
the administration pages (see
page 4) and check the router
status.
Ethernet WAN:
about a data source connected to the
Ethernet WAN port.
+ Blue = Connected to an active
Ethernet WAN interface.
WiFi Broadcast:
indicate activity on the WiFi
broadcast for both the 2.4 GHz
and 5 GHz bands.
+ 2.4G (green) = 2.4 GHz WiFi is on
and operating normally.
+ 5G (blue) = 5 GHz WiFi is on and
operating normally.
Signal Strength:
indicate the active modem's signal
strength.
+ 4 Solid Bars = Strongest signal
+ 1 Blinking Bar = Weakest signal.
(A blinking bar indicates half of
a bar.)
External USB Modem:
status of external USB modem. All
modems have the following LED
indicators:
(continued on page 3)
©2005-2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
The Cradlepoint AER2100 must
Indicates information
These two LEDs
Blue LED bars
Indicates the
|
cradlepoint.com