- ページ 13

ノートパソコン Dell Vostro 1200のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Vostro 1200 42 ページ。 Dell vostro setting up
Dell Vostro 1200 にも：クイックセットアップ (2 ページ)

3 left and right microphone cables

8. Remove the two M2.5x5-mm screws and the two M2.5x10-mm screws from the display and remove the display from the computer.

Replacing the Display Assembly

NOTICE:

Ensure the antenna cables are not twisted and that they are lying flat in the antenna cable clip.

1. Replace the two M2.5x5-mm screws and the two M2.5x10-mm screws that secure the display to the computer base.

2. Connect the display cable to the system board.

3. Connect the Mini Card antenna cables (see

4. Connect the left and right microphone cables.

5. Replace the keyboard (see

6. Replace the hinge cover (see

7. Replace the battery (see

Replacing the

Removing the Display Bezel

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

1. Remove the display assembly (see

2. Remove the four rubber display bumpers.

3. Remove the four M2.5x5-mm screws around the display bezel.

1 rubber display bumpers (4) 2 M2.5x5-mm screws(4)

Mini

Cards).

Replacing the

Keyboard).

Replacing the Hinge

Cover).

Battery).

Removing the Display

Assembly).