- ページ 45

ノートパソコン Dell Vostro 1450のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Vostro 1450 48 ページ。 Document
Dell Vostro 1450 にも： セットアップと機能情報 (9 ページ), サービスマニュアル (48 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する
Dell Vostro 1450 サービスマニュアル
 
3. Replace the five screws that secure the system board to the computer base.
 
4. Connect the following cables to their corresponding connectors on the system board:
 Fan cable
l
 AC adapter cable
l
 WWAN module cable
l
 I/O board cable
l
 Network cable
l
 
5. Replace the optical drive (see
 
6. Replace the speaker module (see
 
7. Replace the palm rest (see
 
8. Replace the keyboard (see
 
9. Connect the camera cable to the connector on the system board.
 
10. Replace the memory modules (see
 
11. Replace the hard drive (see
 
12. Replace the Mini-Cards, if applicable (see
 
13. Replace the base cover (see
 
14. Replace the battery (see
 
15. Replace any installed cards from the ExpressCard slot or 8-in-1 Media Card Reader.
 
CAUTION:
result in damage to the computer.
 
16. Turn on the computer.
NOTE:
 
17. Enter the service tag (see
 Entering the Service Tag in the BIOS
 
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
 
2. Turn on the computer.
 
3. Press <F2> during POST to enter the system setup program.
 
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
 
Great user manuals database on
Replacing the Optical
Replacing the Speaker
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Memory
Replacing the Hard
Drive).
Replacing the
Replacing the Base
Cover).
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
Entering the Service Tag in the
UserManuals.info
Drive).
Module).
Module(s)).
Mini-Card).
BIOS).