- ページ 30

ノートパソコン Dell Vostro 5390のPDF セットアップおよび仕様マニュアルをオンラインで閲覧またはダウンロードできます。Dell Vostro 5390 36 ページ。
Dell Vostro 5390 にも：セットアップおよび仕様マニュアル (35 ページ)

ページを印刷する

Power Management

Enable Advanced Battery Charge

Configuration

Block Sleep

Enable USB Wake Support

Enable Intel Speed Shift Technology

Lid Switch

Table 36. System setup options—Wireless menu

Wireless

Wireless Switch

WLAN

Bluetooth

Wireless Device Enable

WLAN

Bluetooth

Table 37. System setup options—POST Behavior menu

POST Behavior

Numlock Enable

Enable Adapter Warnings

Extend BIOS POST Time

Fastboot

System setup

Enables Advanced Battery Charge Configuration from the beginning of the day to a

specified work period. Advanced Battery Charged maximizes battery health while still

supporting heavy use during the work day.

Default: OFF.

Blocks the computer from entering Sleep (S3) mode in the operating system.

Default: OFF.

NOTE:

If enabled, the computer will not go to sleep, Intel Rapid Start will be

disabled automatically, and the operating system power option will be blank

if it was set to Sleep.

Enables the USB devices to wake the computer from Standby mode.

Default: OFF.

Enables or disables Intel Speed Shift Technology support which enables the operating

system to select the appropriate processor performance automatically.

Default: ON.

Enables the computer to power up from the off state whenever the lid is opened.

Default: ON.

Determines which wireless devices can be controlled by the Wireless Switch. For

Windows 8 systems, this is controlled by an operating system drive directly. As a

result, the setting does not affect the Wireless Switch behavior.

NOTE:

When both WLAN and WiGig are present, enable/disable controls

are tied together. Thus, they cannot be enabled or disabled independently.

Default: ON.

Enable or disable internal WLAN/Bluetooth devices.

Default: ON.

Enables or disables Numlock when the computer boots.

Default: ON.

Enables the computer to display adapter warning messages during boot.

Default: ON.

Configures the BIOS POST (Power-On Self-Test) load time.

Default: 0 seconds.

Configures the speed of the UEFI boot process.