- ページ 41
ノートパソコン Dell Wyse Latitude 3480のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell Wyse Latitude 3480 50 ページ。 Mobile
Dell Wyse Latitude 3480 にも: ユーザーマニュアル (23 ページ)
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]
Option
Description
NOTE:
Default setting: Not set
Internal HDD-0
Allows you to set, change, or delete the administrator password.
Password
NOTE:
Default setting: Not set
Strong Password
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE:
uppercase character, one lowercase character and be at least eight characters long.
Password
Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
Configuration
•
min-4—by default, if you want to change you can increase the number.
•
max-32—you can decrease the number.
Password Bypass
Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
Disabled —enabled by default
•
Reboot bypass
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes
If disabled, the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI Capsule
Allows you to enable or disable. This option controls whether this system allows BIOS updated via UEFI capsule
Firmware Updates
update packages. The options are:
•
Enable UEFI Capsule Firmware—enabled by default
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
TPM On—enabled by default
•
Clear
•
PPI Bypass for Enable Commands—enabled by default
•
PPI Bypass for Disabled Commands
•
Attestation enable—enabled by default
•
Key storage enable—enabled by default
•
SHA-256—enabled by default
•
Disabled
•
Enabled—enabled by default
NOTE:
При обращении используйте промокод AND-PDF и получите скидку.
Successful password changes take effect immediately.
Successful password changes take effect immediately.
If Strong Password is enabled, the Admin and System passwords must contain at least one
To upgrade or downgrade TPM 2.0, download the TPM wrapper tool—software.
System setup options
41