- ページ 37

ノートパソコン Dell XPS 13 7390 2-in-1のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell XPS 13 7390 2-in-1 49 ページ。
Dell XPS 13 7390 2-in-1 にも： セットアップと仕様 (22 ページ), クイック・スタート・マニュアル (18 ページ)

ページを印刷する
Dell XPS 13 7390 2-in-1 サービスマニュアル
Table 4. System setup options—System Configuration menu
System Configuration
Date/Time
Date
Time
Enable SMART Reporting
Storage Interface
Port Enablement
SATA Operation
Drive Information
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Boot Support
Enable External USB Ports
Enable Thunderbolt Technology Support
Enable Thunderbolt Boot Support
Miscellaneous Devices
Enable Camera
Touchscreen
Enable Fingerprint Reader Device
Sets the computer date in MM/DD/YYYY format. Changes to the date take effect
immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Enables or disables SMART (Self-Monitoring, Analysis, and Reporting Technology)
during computer startup to report hard drive errors.
Default: OFF.
Enables the selected onboard drives.
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore Technology).
Displays the information of various onboard drives.
Enables or disables all integrated audio controller.
Default: ON.
Enables or disables microphone.
Default: ON.
Enables or disables internal speaker.
Default: ON.
Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Default: ON.
Enables or disables USB ports to be functional in an operating system environment.
Default: ON.
Enables or disables Thunderbolt Technology Support.
Default: ON.
Enables or disables Thunderbolt Boot Support.
Default: OFF.
Enables or disables various onboard devices.
Enables or disables the camera.
Default: ON.
Enables or disables the touchscreen for the operating system.
NOTE:
Touchscreen will always work in the BIOS setup irrespective of
this setting.
Default: ON.
Enables or disables the Fingerprint Reader Device.
Default: ON.
System setup
37