Datasheet |

Diplexers

AT -WG100 Series

Diplexers

AT -WG101-13

Diplexer with 1310TX/1550RX

AT -WG101-15

Diplexer with 1550TX/1310RX

(AT-WG101-13 and AT-WG101-15 must be

ordered together)

AT -WG102-13

Diplexer with 1310TX/1310RX

(Product must be ordered in pairs)

AT -WG102-15

Diplexer with 1550TX/1550RX

(Product must be ordered in pairs)

AT -WG103-13

Diplexer with 1310TX/1310RX

(Product must be ordered in pairs)

AT -WG103-15

Diplexer with 1550TX/1550RX

(Product must be ordered in pairs)

Double the Fiber Capacity

As stand-alone passive optical components, the

AT-WG100 Series diplexers enable the doubling

of fiber capacity by combining dual fiber strands

onto a single fiber strand.

AT-WG100 Series diplexers are used for multi-

plexing and de-multiplexing broadband and

narrowband wavelengths across a single fiber

strand. By consolidating transmission and receiving

paths, existing fiber pairs have the potential to

double the usable capacity.

Applicaiton

The AT-WG100 diplexer plugs directly into

existing single-mode fiber SC ports using

1310nm or 1550nm wavelengths. Most

USA Headquarters

|

19800 North Creek Parkway

European Headquarters

|

Via Motta 24

Asia-Pacific Headquarters

|

11 Tai Seng Link

www.alliedtelesis.com

© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.

commonly used in back-to-back scenarios, the

AT-WG100 Series can be used with a variety

of network equipment. A typical back-to-back

set up is depicted to the right.

Connectors

Single-mode SC

Performance

AT-WG101-13 & AT-WG101-15 Typical Maximum

Insertion Loss

Crosstalk from TX to RX

Crosstalk from common to TX -40dB

AT-WG102-13 & AT-WG102-15 Typical Maximum

Insertion Loss

Crosstalk from TX to RX

AT-WG103-13 & AT-WG103-15 Typical Maximum

Insertion Loss

Crosstalk from TX to RX

Environmental Specifications

Operating Temperature:

AT-WG101-13 & AT-WG101-15 -25°C to 75°C

AT-WG102-13 & AT-WG102-15 -40°C to 85°C

AT-WG103-13 & AT-WG103-15 -40°C to 85°C

Relative Humidity

Operating Altitude

Physical Characteristics

AT-WG101-13 & AT-WG101-15 10mm x 24mm x 64mm

AT-WG102-13 & AT-WG102-15 19mm x 36mm x 92mm

AT-WG103-13 & AT-WG103-15 19mm x 36mm x 92mm

Weight:

AT-WG101-13 & AT-WG101-15 26 grams

AT-WG102-13 & AT-WG102-15 32 grams

AT-WG103-13 & AT-WG103-15 32 grams

|

Suite 200

|

Bothell

|

|

6830 Chiasso

|

Switzerland

|

T: +41 91 69769.00

|

Singapore

|

534182

|

T: +65 6383 3832

AT-WG102 &

AT-WG103

0.8dB

1.4dB

-60dB

-50dB

-35dB

3.5dB

4.0dB

-60dB

-48dB

3.5dB

4.0dB

-60dB

-55dB

5% to 95% non-condensing

0 to 10,000 feet

WA 98011

|

USA

|

T: +1 800 424 4284

|

F: +41 91 69769.11

|

F: +65 6383 3830

AT-WG101

Key Features

•

Reduce fiber requirements up to 50%

•

Protocol & rate independent

•

Passive with low insertion loss

•

Multiplex & de-multiplex

•

Broadband or narrowband wavelengths

•

Lightweight

•

Simple to install

Ordering Information

AT-WG101-13

Diplexer with 1310TX/1550RX

AT-WG101-15

Diplexer with 1550TX/1310RX

(AT-WG101-13 and AT-WG101-15 must be ordered together)

AT-WG102-13

Diplexer with 1310TX/1310RX

(Product must be ordered in pairs)

AT-WG102-15

Diplexer with 1550TX/1550RX

(Product must be ordered in pairs)

AT-WG103-13

Diplexer with 1310TX/1310RX

(Product must be ordered in pairs)

AT-WG103-15

Diplexer with 1550TX/1550RX

(Product must be ordered in pairs)

|

F: +1 425 481 3895

617-00618-00 Rev. G