- ページ 32

デスクトップ Dell 540s - Studio Slim Desktop PcのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell 540s - Studio Slim Desktop Pc 38 ページ。 Service manual

ページを印刷する

Memory Info

Indicates amount of installed memory, memory speed, channel mode (dual or single), and type of memory installed.

Advanced

CPU type

Indicates the type of CPU installed.

L2 Cache

Indicates the amount of CPU L2 cache.

Advanced Chipset Features Indicates amount of video memory

(32 MB by default).

Integrated Peripherals

Allows you to enable or disable the integrated devices and ports on your system.

CPU Configuration

Allows you to enable or disable the CPU features that enhance the performance of the system.

USB Configuration

Allows you to enable or disable the USB controller.

Power

Power Management Setup

ACPI Suspend Type

Specifies the ACPI suspend type. The default is S3.

Remote Wake Up

This option turns on the computer when a user tries to access the computer through the LAN.

Auto Power On

Enables you to set an alarm to turn on the computer automatically.

Auto Power On Date

Enables you to set the date to turn on the computer automatically (0 by default).

Auto Power On Time

Enables you to set the time to turn on the computer automatically (0:00:00 by default).

AC Recovery

Off; On; Last (Off by default).

Boot

Boot Device Priority

Sets the boot device sequence. Only the bootable devices that are connected to the computer are listed as options.

Removable Device Priority

Sets the boot priority among the attached removable devices.

Hard Disk Boot Priority

Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected.

CD/DVD Boot Priority

Sets the CD/DVD drive boot priority. The items displayed are dynamically updated according to the hard drives detected.

Boot Settings Configuration Configure Fast Boot, Numlock, and Keyboard errors.

Security

Provides options to enable, disable, or change the passwords.

Exit

Exit Options

Provides options to Exit Saving Changes, Exit Discarding Changes, Load Setup Default, and Discard Changes.

Boot Sequence

This feature allows you to change the boot sequence for devices.

Boot Options

Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error

message.

CD/DVD Drive — The computer attempts to boot from the CD/DVD drive. If no CD/DVD is in the drive, or if the CD/DVD has no operating system, the

computer generates an error message.

USB Flash Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in the upper-right corner of

the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD drive to run the Dell Diagnostics on the Drivers and

Utilities media. On completion of diagnostic tests, the previous boot sequence is restored. You can also use this feature to restart your computer to a USB

device such as a USB floppy drive, or a memory key.

1. If you are booting to a USB device, connect the USB device to a USB connector.

2. Turn on (or restart) your computer.

3. When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your

computer and try again.

The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it.

4. On the Boot Device Menu choose the device from which you want to boot.

For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.