ページを印刷するInstalling the Hard-Drive Assembly
1.
Replace the hard drive into the hard-drive bracket.
2.
Install the screws that secure the hard-drive bracket.
3.
Install the hard-drive assembly into its slot on the computer.
4.
Install the screws that secure the hard-drive assembly to the computer.
5.
Connect the SATA cable and the power cable to the hard-drive assembly.
6.
Install the:
•
bezel
•
cover
7.
Follow the procedures in
Removing the Optical Drive
1.
Follow the procedures in
2.
Remove the:
•
cover
•
bezel
3.
Follow the steps to remove the optical drive:
a. Disconnect the data cable [1] and power cable [2] from the optical drive.
b. Remove the screws that secure the optical drive [3].
c. Slide the optical drive from the drive bay to remove it from the computer [4].
12
After Working Inside Your
Before Working Inside Your
Computer.
Computer.