- ページ 19
デスクトップ Dell D18MのPDF セットアップおよび仕様マニュアルをオンラインで閲覧またはダウンロードできます。Dell D18M 39 ページ。 Remote power switch
Dell D18M にも： オーナーズマニュアル (45 ページ), セットアップと仕様 (39 ページ), インストレーション・マニュアル (11 ページ)
ページを印刷する
Option
Date/Time
.
System information
Table 19. System Configuration
Option
Integrated NIC
Serial Port
SATA Operation
Drives
Smart Reporting
USB Configuration
Description
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not
selected by default. The options are:
•
Disabled
•
Enabled
•
Enabled w/PXE (default)
NOTE:
Depending on the computer and its installed devices, the items listed in this
section may or may not appear.
Determines how the built-in serial port operates.
Choose any one option:
•
Disabled
•
COM1 (default)
•
COM2
•
COM3
•
COM4
Allows you to configure the operating mode of the integrated hard drive controller.
•
Disabled = The SATA controllers are hidden
•
AHCI = SATA is configured for AHCI mode
•
RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
SATA-4
•
M.2 PCIe SSD-0
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
•
Enable USB Boot Support
•
Enable Front USB Ports
•
Enable Rear USB Ports
System setup
19