- ページ 27

デスクトップ Dell D29MのPDF セットアップと仕様をオンラインで閲覧またはダウンロードできます。Dell D29M 38 ページ。
Dell D29M にも：セットアップと仕様 (20 ページ), セットアップと仕様 (20 ページ), セットアップと仕様 (22 ページ), セットアップおよび仕様マニュアル (37 ページ)

ページを印刷する

System information

Table 22. System Configuration

Option

Integrated NIC

SATA Operation

Drives

Smart Reporting

USB Configuration

Front USB Configuration

Rear USB Configuration

Audio

Dust Filter Maintenance

Video screen options

Table 23. Video

Option

Primary Display

Description

Allows you to control the onboard LAN controller. The option 'Enable UEFI Network Stack' is

not selected by default. The options are:

● Disabled

● Enabled

● Enabled w/PXE (default)

NOTE:

Depending on the computer and its installed devices, the items that are listed in

this section may or may not appear.

Allows you to configure the operating mode of the integrated hard drive controller.

● Disabled = The SATA controllers are hidden

● AHCI = SATA is configured for AHCI mode

● RAID ON = SATA is configured to support RAID mode (selected by default)

Allows you to enable or disable the various drives onboard:

● SATA-0 (enabled by default)

● M.2 PCIe SSD-0 (enabled by default)

This field controls whether hard-drive errors for integrated drives are reported during system

startup. The Enable Smart Reporting option is disabled by default.

Allows you to enable or disable the integrated USB controller for:

● Enable USB Boot Support

● Enable Front USB Ports

● Enable Rear USB Ports

All the options are enabled by default.

Allows you to enable or disable the front USB ports. All the ports are enabled by default.

Allows you to enable or disable the back USB ports. All the ports are enabled by default.

Allows you to enable or disable the integrated audio controller. The option Enable Audio is

selected by default.

● Enable Microphone

● Enable Internal Speaker

Both the options are selected by default.

Allows you to enable or disable BIOS messages for maintaining the optional dust filter that

is installed in your computer. BIOS will generate a pre-boot reminder to clean or replace the

dust filter based on the interval set. The option Disabled is selected by default.

● Disabled

● 15 days

● 30 days

● 60 days

● 90 days

● 120 days

● 150 days

● 180 days

Description

Allows you to select the primary display when multiple controllers are available in the system.

System setup