- ページ 16
デスクトップ Dell Dimension 2400 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell Dimension 2400 Series 43 ページ。 Vga card installation instructions
Dell Dimension 2400 Series にも: クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ), インストレーション・マニュアル (20 ページ), インストールマニュアル (8 ページ), ラック取り付け説明書 (32 ページ), インストレーション・インストラクション (1 ページ)
Replacing the Front Panel
To replace the front panel, attach the side hinges and then rotate the front panel until it snaps onto the front of the computer.
Removing the Front-Panel Insert
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in your Owner's Manual or Product Information
Guide.
1.
Shut down the computer
through the Start menu.
2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3. Disconnect any telephone or telecommunication lines from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
5.
Remove the computer
cover.
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
6.
Remove the front
panel.
7. Press in the two insert tabs, and then push out the front-panel insert.