- ページ 32
デスクトップ Dell Dimension 4700CのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Dimension 4700C 42 ページ。 Dell desktop computer quick setup guide
Dell Dimension 4700C にも: クイック・セットアップ・マニュアル (2 ページ)
Back to Contents Page
System Setup
Dell™ Dimension™ 4700C Service Manual
Overview
Entering System Setup
System Setup Screens
System Setup Options
Clearing Forgotten Passwords
Clearing CMOS Settings
Overview
Use system setup as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change a user-selectable option such as the user password
l
To read the current amount of memory or set the type of hard drive installed
l
Before you use system setup, it is recommended that you write down the system setup screen information for future reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work
incorrectly.
Entering System Setup
1. Turn on (or restart) your computer.
2. When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then
computer
and try again.
System Setup Screens
The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the
options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup window. The field is a
scrollable list containing features that define the configuration of your computer, including
installed hardware, power conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option is highlighted, the
Option Field displays more information about that option and the option's current and
available settings.
Press <Enter> to expand or contract each of the main option fields.
System Setup Options
NOTE:
Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.
System
Identifies whether the computer's processor supports Hyper-Threading and lists the processor bus speed, processor ID, clock speed, and
CPU Info
L2 cache.
Indicates amount of installed memory, memory speed, channel mode (dual or single), and type of memory installed.
Memory Info
Displays current date and time settings.
Date/Time
The computer attempts to boot from the sequence of devices specified in this list.
Boot Sequence
NOTE:
If you insert a boot device and restart the computer, this option appears in the system setup menu. To boot from a USB memory
device, select the USB device and move it so it becomes the first device in the list.
Option Field — This field contains information about each
option. In this field you can view your current settings and
make changes to your settings.
Use the right- and left-arrow keys to highlight an option.
Press <Enter> to make that selection active.
Key Functions — This field appears below the Option Field
and lists keys and their functions within the active system
setup field.
shut down your