- ページ 36
デスクトップ Dell Dimension 5100のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Dimension 5100 40 ページ。 Setting up your computer
Dell Dimension 5100 にも： セットアップ (2 ページ), セットアップ (2 ページ), セットアップ (2 ページ), セットアップマニュアル (2 ページ), セットアップマニュアル (2 ページ)
ページを印刷する
1
memory module
2
securing clips
Installing the Memory Modules
NOTE:
If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.
1. Align the notch in the module edge connector with the tab in the connector slot.
2. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the
module and reinstall it.
3. Replace the cover and tighten the captive screw.
NOTICE:
4. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click the Start button, click Help and Support, and then click Computer Information.
CD or DVD Drive
Removing the CD or DVD Drive
CAUTION:
CAUTION:
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
2. Turn the computer over, and remove the M2.5 x 8-mm screw labeled "O" next to the memory module cover.
3. Loosen the captive screw (labeled "circle M") in the memory module cover, and lift the cover away from the computer.
Great user manuals database on
If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.
Before working inside your Dell™ computer, read the safety instructions in your Owner's Manual.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
"Preparing to Work Inside the
UserManuals.info
Computer."