- ページ 22

デスクトップ Dell Inspiron 1318のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 1318 47 ページ。

ページを印刷する
Dell Inspiron 1318 サービスマニュアル
 
1. Remove the display assembly (see Display).
 
2. Remove the display bezel (see Display).
 
3. Remove the display panel (see Display).
 
4. Turn over the display panel, and place it on a clean surface.
 
5. Gently pull the tab on the flex cable to disconnect the flex cable from the connector on the inverter board.
 
6. Lift the tape to disconnect the flex cable from the connector on the back of the display panel.
1
top flex cable connector
3
back of display panel
5
bottom flex cable connector
 Replacing the Display Panel Cable
NOTICE:
To avoid damage to the inverter board when replacing the flex cable, gently support the bottom of the inverter board with one finger as you
reseat the flex cable. Do not bend the inverter board.
 
1. Connect the flex cable to the connector on the inverter board.
 
2. Connect the other end of the flex cable to the connector on the back of the display panel and adhere the tape back into position.
 
3. Replace the display panel (see Display).
 
4. Replace the display bezel (see Display).
 
5. Replace the display assembly (see Display).
Back to Contents Page
 
2
flex cable
4
pull tab
6
inverter board