ページを印刷する1
A) Place the face plate face down on a table.
B) Slide the touch panel into the "U" shaped
channel on the back of the face plate in front of
the flange.
C) Tighten 1/4-20 screws on flange until they
touch the TC8. Do not overtighten. The touch
panel should sit in the bottom of the channel in
the flange.
2
Place the wall box over the back of the
face plate lining up the four holes on
the faceplate.
E
800-285-8315
C)
AVTEQ.net