- ページ 8

デスクトップ Dell XPS 15のPDF セットアップと仕様をオンラインで閲覧またはダウンロードできます。Dell XPS 15 19 ページ。 2-in-1
Dell XPS 15 にも： クイック・スタート・マニュアル (2 ページ), 仕様 (4 ページ), 仕様 (6 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), セットアップと仕様 (20 ページ), クイック・スタート・マニュアル (14 ページ)

ページを印刷する
Dell XPS 15 セットアップと仕様
NOTE:
If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you
must disconnect and connect it again to enable charging.
NOTE:
Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the
computer to charge the device.
3
HDMI port
Connect a TV or another HDMI-in enabled device. Provides video and audio output.
4
Thunderbolt 3 (USB 3.1 Gen 2 Type-C) port with Power delivery
Supports USB 3.1 Gen 2, DisplayPort 1.2, Thunderbolt 3 and also enables you to connect to an external display using a display adapter.
Provides data transfer rates up to 10 Gbps for USB 3.1 Gen 2 and up to 40 Gbps for Thunderbolt 3. Supports Power Delivery that
enables two-way power supply between devices. Provides up to 5V/3A power output that enables faster charging.
NOTE:
Adapters (sold separately) are required to connect standard USB and DisplayPort devices.
5
Headset port
Connect headphones or a headset (headphone and microphone combo).

Right

1
SD-card slot
Reads from and writes to the SD card.
2
USB 3.1 Gen 1 port with PowerShare
Connect peripherals such as external storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge your USB devices even when your computer is
turned off.
NOTE:
If the charge on your computer's battery is less than 10 percent, you must connect the power adapter to charge
your computer, and USB devices connected to the PowerShare port.
NOTE:
If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you
must disconnect and connect it again to enable charging.
NOTE:
Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the
computer to charge the device.
3
Battery-charge status lights (5)
Turn on when the battery-charge status button is pressed. Each light indicates approximately 20% charge.
4
Battery-charge status button
Press to check the charge remaining in the battery.
5
Security-cable slot (for Noble locks)
Connect a security cable to prevent unauthorized movement of your computer.
8
Views