- ページ 4

コーヒーメーカー Chris Coffee Service VetranoのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Chris Coffee Service Vetrano 17 ページ。 Espresso machine

Introduction

First of all, thank you for your business!

You are going to love your new Vetrano – it combines beauty, value, and great brewing for

making the best espressos, cappuccinos, and lattes you've ever tasted! These instructions

include hints that will help you get started quickly.

• Before connecting your machine to your water source, test your water for hardness using

the provided test strips.

Fill a glass with cold tap water; dip the tip of the test strip into the water for one second,

then pull the strip out of the water and hold it horizontally for fifteen seconds. After fifteen

seconds, compare the color of the strip to the chart on the side of the package to

determine how many grains of hardness is in your tap water. Three grains or less of

hardness is acceptable.

Note:

Should your water's hardness level exceed three grains, then it is strongly

recommended that a softener system be installed to prolong the life of your machine.

• Included with the braided water line are two fiber washers. One washer is to be used in

between the elbow connection of the braided line and where it attaches to the back bottom

of the machine. The other washer is to be used if you will not be using the provided John

Guest fitting. (No teflon tape needed)

• Attach the braided water line to the back bottom of the machine using the provided fiber

washer. Attach the other end to your water source using the provided John Guest fitting.

The machine comes standard with a 3/8" John Guest fitting, but a 1/4" fitting can also be

installed. To use the John Guest fitting the tubing needs to have a clean rounded cut using

a tubing cutter or a sharp razor blade. Then insert the tubing into the John Guest fitting

until it bottoms out.

• If you are not going to be using the John Guest fitting then you will need to use the

additional fiber washer and you will need to purchase a 3/8" male BSPP fitting.

• After connecting both ends of the braided water line, turn on the water supply and verify

there are no leaks.

• Before plugging the machine in, verify the steam and hot water knobs are closed and the

brew lever is in the down position.

• Plug the machine in and turn the main power switch to the on position.

Vetrano

Chris' Coffee Service Inc.

- 4 -