- ページ 25

サーバー Dell 6100のPDF ラックの設置をオンラインで閲覧またはダウンロードできます。Dell 6100 34 ページ。 Dell poweredge 4200 servers: installation guide
Dell 6100 にも：ラックの設置 (37 ページ), 補足マニュアル (4 ページ), ハードウェアマニュアル (15 ページ)

ページを印刷する

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

support.dell.com

Align the slide-assembly mounting-bracket flange (on the front of the slide

assembly) with the square holes in the front vertical rails (see Figure 8).

Push the slide assembly forward until the mounting hooks are located in their

respective square holes on the vertical rail, and then push down on the mounting-

bracket flange until the mounting hooks engage the square holes in the front

vertical rail, allowing the push button to pop out and click.

7 .

At the back of the cabinet, pull back on the mounting-bracket flange until the

mounting hooks are located in their respective square holes, and then push down

on the mounting bracket flange until the mounting hooks engage the square

holes on the back vertical rail, allowing the push button to pop out and click.

Repeat steps 4 through 7 for the remaining slide assembly on the other side of

the rack.

Ensure that the rails are mounted at the same position on each side of the rack.

Installing the Shoulder Screws and the Rack Adapters

CAUTION: The computer may weigh up to 32 kilograms (kg) (70 pounds

[lb]) when fully loaded. To prevent personal injury, do not attempt to move

the computer by yourself.

Lay the computer on its left side and remove the feet from the computer:

Using a small flat-blade screwdriver, unscrew the screw securing each foot.

Pull each foot from the chassis.

Remove the rubber plugs from the screw holes on the computer's side panel.

DELL CONFIDENTIAL - Preliminary

9/8/00

Rack Installation Guide