- ページ 11
サーバー Dell D90DWのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell D90DW 24 ページ。 D class cloud clients
Dell D90DW にも: クイック・スタート・マニュアル (6 ページ), クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (6 ページ), クイック・スタート・マニュアル (6 ページ), クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (10 ページ)
![Dell D90DW インストレーション・マニュアル](/uploads/products/server2/3183164/3183164.jpg)
3
Installing X Class Flash
This chapter contains information for users of Wyse X class mobile thin clients who
must install new flash.
Requirements
Small Phillips screwdriver
•
WARNING: Flash modules may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD. Before you
remove or install a module, touch any metal part of the chassis and keep that contact
with the chassis during the installation process.
Procedures
CAUTION: Follow all precautions listed in the Quick-Start Guide that came with your
mobile thin client for disconnecting and reconnecting the mobile thin client.
1. Perform a proper shutdown of the mobile thin client by closing all files and ending
your session, and then pressing the power button to turn off the mobile thin client.
2. Unplug the power cord and power adapter, and then remove any other cables from
the mobile thin client.
3. Position the mobile thin client to access the bottom cover, and then remove the
screws from the cover using a small Phillips screwdriver as shown in Figure 6.
Figure 6 Removing the bottom cover screws
4. Lift the bottom cover to remove it and expose the flash module as shown in
Figure 7.
WARNING: Flash modules may be susceptible to damage by Electro-Static
Discharge (ESD). All industry-standard cautions should be followed to avoid ESD.
Before you remove or install a module, touch any metal part of the chassis and keep
that contact with the chassis during the installation process.