ページを印刷する
Network Settings screen details
The Network Settings screen details are explained as follows:
About this task
Option
Description
UEFI PXE
Enables you to control the configuration of the UEFI PXE device.
Settings
PXE Device n (n
Enables or disables the device. When enabled, a UEFI PXE boot option is created for the device.
= 1 to 4)
PXE Device n
Enables you to control the configuration of the PXE device.
Settings(n = 1 to
4)
UEFI HTTP
Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the device.
Settings
HTTP Device n
Enables you to control the configuration of the HTTP device.
Settings (n = 1 to
4)
UEFI iSCSI
Enables you to control the configuration of the iSCSI device.
Settings
TLS
View and/or modify this device's boot TLS authentication mode. None means the HTTP server and
Authentication
the client will not authenticate each other for this boot. One way means the HTTP server will be
Configuration
authenticated by the client, while the client will not be authenticated by the server. This option is set
to None by default.
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video
controller, integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
1. Power on or restart the system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
16
BIOS and UEFI
Table 1. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Description
Specifies the name of the iSCSI initiator in IQN
format.
Enables or disables the iSCSI device. When
disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to
Disabled by default.
Enables you to control the configuration of the
iSCSI device.