ページを印刷する
Figure 10. Power module assembly specifications
Table 8. Power module assembly
Item
1
2
3
4
5
PowerEdge XR sleds ports and connectors
PowerEdge XR8610t
Table 9. PowerEdge XR8610t externally accessible ports and connectors
Connector
Description
USB ports and
● One USB 3.0-compliant port on the front of the sled.
connectors
● One Micro-AB USB 2.0-compliant port for iDRAC Direct on the front of the sled.
● One RJ45 port for iDRAC remote management (dedicated port only) on the front of the sled.
● One RJ45 with port for dry contact input connection.
● One Mini-DisplayPort on the front of the sled.
● Two (optional) 25 GbE SFP 28 embedded LAN on Motherboard (LOM) ports.
Component
Power distribution board 2/ Chassis
Manager (PDB2/CM)
Power distribution board 1 (PDB1)
Power Interposer Board (PIB)
Power Interposer Board (PIB)
Power module tray
Description
This is the power distribution board
which provides power to the chassis
components. The PSU 2 slot is on the
PDB 2. Chassis Manager (CM) is also
integrated on this board.
This is the power distribution board
which provides power to the chassis
components. The PSU 1 slot is on the
PDB 1.
The power interposer board (PIB)
provides power to the 1U and 2U sleds.
The power interposer board (PIB)
provides power to the 1U and 2U sleds.
The power module tray houses the
complete power module assembly.
Technical specifications
15