- ページ 7

エアクリーナー DH Lifelabs HD100-120BLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DH Lifelabs HD100-120BL 14 ページ。

ページを印刷する

Remove Front Cover

Use the anti-theft wrench

to loosen the anti-theft

screw in the bottom part.

Security Screw

Remove Filters

Activated Carbon Filter

Take out the activated

carbon filter and remove any

protective packaging.

Remove Power Supply Cover

Power Supply Cover

Loosen the screw on the

cover of the power supply

unit and take off the cover.

Install Gromet & Small Bracket

Trim the gromet to a moderate

size. Install the trimmed gromet

to the small bracket.

Lift the bottom up and

gently push up to remove

the complete cover.

HEPA Filter

Take out the HEPA filter

and remove any protective

packaging.

Install the protruding side of

it into the power cable hole

on the back of the device.

Install the unit with the

tapping screws to fix it.

Pass Power Cables Through Device

Hold up the device. Pass the

power cables through the hole

on the back of the device.

Mount Device to Bracket

Align the top of the device to the TOP LINE labeled on the positioning

sticker. Slide the device down until the mounting slots on the back of the

device snaps into the mounting bracket. Check to make sure the device is

secure and does not wobble.

Connect the power cables to the terminal

Organize the power cables and connect them to the

corresponding terminal ports. In order from left to right:

first is the black cable (L-Live). Secondly, it's the green cable

(E-Earth). Last, the white cable (N-Neutral).

Left: Black cable (L-Live).

Middle: Green cable (E-Earth)

Right: White cable (N-Neutral).

L - Live

E - Earth

N - Neutral