- ページ 10
サーバー Dell EMC VxFlex Ready Node 14GのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dell EMC VxFlex Ready Node 14G 22 ページ。
Dell EMC VxFlex Ready Node 14G にも： 検査マニュアル (8 ページ)
ページを印刷する
Quick Start Guide
VxFlex Ready Node Quick Start Guide
10
Minimally, you must select these packages:
LIA
l
MDM
l
SDC
l
SDS (The SDSx packages are not needed.)
l
c. Click Open.
d. Click Upload.
The packages are uploaded to the VxFlex OS Installation Manager, and are
displayed in the file table.
2. Click Proceed to Install.
3. Prepare the CSV topology file:
a. Enter the Backend node information in the CSV topology file:
In 2-layer configuration, the Linux servers will form the MDM cluster, and
each of those servers will also be SDS.
The following example shows a sample CSV topology file. Only those
columns with values in them are shown:
Note
When specifying the Linux SDS devices, use persistent device names. You
can find these names by running the command: # ls -l /dev/disk/by-
id/ *.
b. Add SDCs to the CSV (or later in the process), according to the following
table:
SDC
Add SDCs by one of the following methods:
server
OS
Linux or
With the VxFlex OS Installation Manager, by adding a row to the
l
Windows
CSV for each SDC, as described in
deployment
Manually after deploying the system, as described in
l
external SDC to an existing VxFlex OS system
ESXi
With the vSphere plug-in, later in the process, as described later in
l
this document.
Manually after deploying the system, as described in
l
external SDC to an existing VxFlex OS system
The CSV is complete.
CSV topology file for 2-layer
on page 11.
Adding an
on page 14.
Adding an
on page 14.