- ページ 34
サーバー Dell EMC VxRail E SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell EMC VxRail E Series 35 ページ。 Appliances on poweredge servers
Memory channels are organized as follows:
Table 40. Memory channels
Processor
Chan 0
Processor 1
Slots A1 and
A7
Processor 2
Slots B1 and
B7
General memory module installation guidelines
To ensure optimal performance of your system, follow the general guidelines when configuring your system memory. If your
system's memory configurations fail to observe these guidelines, your system might not boot, stop responding during memory
configuration, or operate with reduced memory.
NOTE:
Memory configurations that fail to observe these guidelines can prevent your appliance from booting, stop
responding during memory configuration, or operating with reduced memory.
The following are the recommended guidelines for installing memory modules:
● RDIMMs and LRDIMMs must not be mixed.
● If memory modules with different speeds are installed, they will operate at the speed of the slowest installed memory
module(s) or slower depending on appliance DIMM configuration.
● Populate memory module sockets only if a processor is installed. For single-processor appliance, sockets A1 to A12 are
available. For dual-processor appliance, sockets A1 to A12 and sockets B1 to B12 are available.
● Populate all the sockets with white release tabs first, and then the black release tabs.
● Mixing of more than one memory module capacities in the appliance is not supported.
● In a dual-processor configuration, the memory configuration for each processor should be identical. For example, if you
populate socket A1 for processor 1, then populate socket B1 for processor 2, and so on.
● VxRail appliances require that you populate six memory modules per processor for single processor configurations and
twelve memory modules per processor for dual-processor configurations (one DIMM per channel) at a time to maximize
performance.
Expansion cards and expansion card riser
An expansion card in the appliance is an add-on card that can be inserted into an expansion slot on the system board or riser
card to add enhanced functionality to the appliance through the expansion bus.
NOTE:
To avoid data loss, ensure that you refer to the procedures in the SolVe Desktop application before performing any
memory or expansion card replacement or upgrade procedures.
NOTE:
A System Event Log (SEL) event is logged if an expansion card riser is unsupported or missing. It does not prevent
your appliance from turning on and no BIOS POST message or F1/F2 pause is displayed.
Expansion card installation guidelines
Your appliance supports PCI Express Generation 3 expansion cards.
Table 41. Expansion card riser configurations
Expansion card riser
Riser 1A
Riser 2A
The following table provides guidelines for expansion cards priority to ensure proper cooling and mechanical fit.
34
Replacing and adding hardware
Chan 1
Chan 2
Slots A2 and
Slots A3 and A9
A8
Slots B2 and
Slots B3 and B9
B8
PCIe slots on the
riser
Slot 1
Slot 2
Slot 3
Chan 3
Slots A4 and A10 Slots A5 and A11
Slots B4 and B10 Slots B5 and B11
Processor
Height
connection
Processor 1
Low Profile
Processor 1
Low Profile
Processor 2
Low Profile
Chan 4
Chan 5
Slots A6 and A12
Slots B6 and B12
Length
Half Length
Half Length
Half Length
Slot
width
x16
x16
x16