- ページ 9

サーバー Dell PowerEdge 2410のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2410 9 ページ。 Cabling poweredge t610
Dell PowerEdge 2410 にも：マニュアル (20 ページ), マニュアル (20 ページ), マニュアル (17 ページ), マニュアル (12 ページ), マニュアル (10 ページ), マニュアル (10 ページ), マニュアル (9 ページ), マニュアル (10 ページ), マニュアル (12 ページ), マニュアル (11 ページ), マニュアル (8 ページ)

Cabling the Dell™ PowerEdge™ R710

Figure 7: Replacing Outer Power Supply

Inner CMA attachment

housing has been

disconnected

Cabling a PowerEdge R710 Installed in Static Rails

NOTE: The CMA is only compatible with sliding rails, and not with static rails.

1. Follow the instructions in the Rack Installation Guide included in the static rail kit to install the server into a 2‐

post or 4‐post rack.

2. Verify that the hook and loops straps provided with the static rail kit are installed to the rear of the rails.

3. Plug in all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to either the left

rail or right rail as described in the Rack Installation Guide. See Figure 8.

Figure 8: Cabling a System Installed in Static Rails

Page 7