- ページ 7

サーバー Dell PowerEdge 2950のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2950 10 ページ。 Cabling instructions for the -48 vdc power supply
Dell PowerEdge 2950 にも：情報更新 (50 ページ), インストレーション情報 (11 ページ), 更新 (2 ページ), 取扱説明書 (15 ページ)

ページを印刷する

Figure 1-3. SATA Cable Routing in the PowerEdge 1950

SATA data cable

chipset shroud

SATA power cable

5 Reinstall the SAS controller daughter card and reconnect the SAS cable.

See "SAS Controller Daughter Card" in your Hardware Owner's Manual.

6 Close the system. See "Closing the System" in your Hardware Owner's

Manual.

7 Reconnect the system to power and turn on the system and attached

peripherals.

Installing the SATA Optical Drive – PowerEdge 2970 or 2950

1 Insert the optical drive tray into the system until it is fully inserted and

locked into position.

2 Connect the SATA cable (the end with the branching power cable) to the

back of the optical drive.

3 Connect the branching power cable to the power supply connector.

SATA_A connector on system board

system fans

optical drive

Installing a SATA Optical Drive