- ページ 19

サーバー Dell PowerEdge C1100のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Dell PowerEdge C1100 32 ページ。 Poweredge series
Dell PowerEdge C1100 にも：情報更新 (14 ページ), ポートフォリオ・マニュアル (27 ページ)

ページを印刷する

Table 1-19. IPMI Settings

Settings

Enable IPMI Over LAN

Channel Privilege Level Limit

Encryption Key

Table 1-20. VLAN Settings

Settings

Enable VLAN ID

VLAN ID

Priority

Platform Events

All alert settings can be enabled or disabled. To change the setting for all alerts, perform the

following steps:

1 Enter all event actions and alerts.

2 To activate all alert settings that have been defined in the Set Platform Events window, mark

the Enable Platform Event Filter alerts checkbox.

3 To deactivate all alert settings that have been defined in the Set Platform Events window,

clear the Enable Platform Event Filter alerts checkbox.

4 Click Apply Changes.

The Platform Event Filters List displays the actions that execute when an event occurs. An event

occurs when the status of a system element is outside a set limit. The event list also indicates if an

alert is enabled or disabled for each event.

Table 1-21 provides the Actions and Alerts that can occur when an event is out of bounds. Only one

action can be set for each event.

Description

Enable IPMI LAN Channel

The maximum privilege level that can be accepted on the LAN

Channel.

Format: 0 to 20 bytes (even number of hexadecimal characters, no

blank spaces are allowed).

Description

If enabled, only matched VLAN ID traffic is accepted.

VLAN ID field of 802.1g fields. Enter a valid value for Virtual LAN ID

(must be a number from 1 to 4094).

Priority field of 802.1g fields. Enter a number from 0 to 7 to set the

Priority of the Virtual LAN ID.

Using the Baseboard Management Controller