- ページ 16

ネットワークカード 2Wire third-party wireless Ethernet adaptersのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。2Wire third-party wireless Ethernet adapters 19 ページ。 Wireless client

ページを印刷する

Select your wireless network name. Your wireless network name is "

digits of your HomePortal serial number, located on the bottom of your HomePortal.

In the Password field, enter "

bottom of your HomePortal.

Click

Other wireless Ethernet adapters

Note:

The following steps are completed using the configuration program provided with your wireless

adapter. If you have not already done so, install the wireless adapter configuration software before

continuing.

Set the network type to

editing the card's network profile. Your wireless card should be configured to operate with an access

point or residential gateway. This mode of operation is typically enabled by setting network type to

Infrastructure.

Set the wireless network name. The wireless network name of your HomePortal is

letters, followed by the last three digit of the HomePortal serial number located on the bottom of your

HomePortal. For example, if the last three digits of your HomePortal serial number are 102, your

HomePortal network name would be 2WIRE102.

The wireless network name is sometimes referred to as the

LAN ID

followed by your ten-digit Wireless Encryption Key, located on the

. Refer to your wireless card documentation for instructions on

Infrastructure

2WIRE

Network Name

" followed by the last three

in all capital

2WIRE

, or

SSID

ESS ID

Wireless