- ページ 10
バッテリーチャージャー Cradlepoint PS6SMC70MのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cradlepoint PS6SMC70M 16 ページ。 Usb/modem charging cradle
ページを印刷するSymptom:
Attempt to synchronize the terminal through USB failed.
Possible Cause
The host computer cannot find the
terminal.
The terminal was removed from the
cradle while the synchronization was in
progress.
Terminal or cradle was disconnected from
the host computer while the
synchronization was in progress.
Terminal's battery is dead.
Symptom:
Attempt by the cradle to HotSync the terminal through the
modem failed.
Possible Cause
The terminal was removed from the
cradle while the HotSync was in
progress.
Terminal or cradle was disconnected
from the telephone line while the
HotSync was in progress.
Terminal's battery is dead.
Active Error dialog box on terminal.
Other Connection Problems
If you require more information on the synchronization process, please refer to the
ActiveSync chapter in your handheld product's Reference Guide or documentation on your
rd
custom or 3
Party software. For help with other technical issues, cont act CradlePoint
Technical Support using the contact information provided at the start of this chapter.
CradlePoint USB/Modem Charging Cradle User Guide
Action
Make sure you have successfully installed
ActiveSync software and created a Partnership
between the terminal and the host computer.
(See your Symbol documentation for more
information if you need help with ActiveSync.)
Place the terminal back in the cradle to allow the
cradle to make another synchronization attempt.
Plug the USB cable back into both the cradle and
the host computer. Check the connections to be
sure they are secure.
Wait for two (2) minutes before trying to
synchronize again to allow the battery to
recharge.
Action
Place the terminal back in the cradle to allow
the cradle to make another HotSync attempt.
Unplug the modem cable for 30 seconds to
allow the local telephone connection to hang
up. Be sure to close any open windows on the
terminal and any modem connections.
Wait for two (2) minutes before trying a
HotSync again to allow the battery to recharge.
The Error dialog box on the terminal must be
cleared. Use the stylus to press "OK" on the
terminal's touchscreen.
CradlePoint, Inc
7