- ページ 20

サーバー Dell PowerEdge FD332のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge FD332 46 ページ。
Dell PowerEdge FD332 にも：はじめに (2 ページ)

Figure 17. Removing and installing the I/O connector cover

storage sled

Next step

Install the storage sled or sled blank.

Installing a storage sled

Prerequisites

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple

repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.

Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

CAUTION:

To prevent damage to the I/O connectors, do not touch the connectors or the connector pins.

CAUTION:

To prevent damage to the sled locks, use a #2 Phillips screwdriver to turn the sled locks to lock or unlock positions.

NOTE:

Install the storage sleds in the bottom slots of the PowerEdge FX2s enclosure, beginning from the left (slot 3). In the

four-bay chassis, you can also install a storage sled in the top right slot (slot 2) of the enclosure. For more information on sled

slot numbering, see the

NOTE:

If your storage sled has shipped pre-installed in the enclosure, it is recommended that you remove the sled before

installing the enclosure in the rack, to reduce chassis weight.

NOTE:

If you are installing the storage sled in an enclosure that is already powered on, you need not turn off the enclosure to

install the storage sled. Only the compute sled(s) to which the storage sled is mapped must be turned off.

Ensure that you read the Safety instructions.

Turn off the compute sled to which the storage sled is mapped, by using the CMC, iDRAC, or the power button on the compute sled.

Keep the #2 Phillips screwdriver ready.

Steps

If you are installing a new storage sled, remove the I/O connector cover and save for future use.

Align the storage sled with the bay in the enclosure.

Installing and removing storage sled components

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual at dell.com/poweredgemanuals.

I/O connector cover