- ページ 5
サーバー Dell PowerEdge FD332のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge FD332 46 ページ。
Dell PowerEdge FD332 にも： はじめに (2 ページ)
ページを印刷する
The Dell PowerEdge FD332 is a storage sled supported on the Dell PowerEdge FX2s enclosure. PowerEdge FD332 supports up to sixteen
hot swap 2.5 inch hard drives/SSDs, and a storage controller module with single or dual controller modes.
Topics:
•
Terms used in this document
•
Front panel features and indicators—PowerEdge FD332
•
Hard drive/SSD indicators
•
Storage Controller Module indicators
•
Documentation matrix
•
Quick Resource Locator
Terms used in this document
The following table describes the terms used in this document.
Term
Enclosure or chassis
Three-bay chassis
Four-bay chassis
Six-bay chassis
Storage sled or system
Compute sled
Hot swap
Drive drawer
PowerEdge RAID Controller (PERC)
PowerEdge HBA Controller (HBA)
About your Dell PowerEdge FD332
Description
Refers to the PowerEdge FX2s enclosure.
Refers to the PowerEdge FX2s enclosure configuration that
supports one full-width and two half-width sleds.
Refers to the PowerEdge FX2s enclosure configuration that
supports four half-width sleds.
Refers to the PowerEdge FX2s enclosure configuration that
supports four quarter-width sleds and two half-width sleds.
Refers to PowerEdge FD332.
Refers to the half-width, quarter-width, or full-width sleds, to which
the storage sled(s) may be mapped.
A component is considered hot swap if it can be removed or
installed while the sled is powered on.
Refers to the hard drive/SSD drawer that can support up to 16 hot
swap hard drives/SSDs.
Refers to the storage adapter(s) on the storage controller module.
Refers to the storage adapter(s) on the storage controller module.
NOTE:
PowerEdge FD332 is not supported on the
PowerEdge FX2 enclosure.
NOTE:
The storage sled is not supported with the
PowerEdge FM120x4 half-width compute sled.
About your Dell PowerEdge FD332
1
5