- ページ 25

サーバー Dell PowerEdge M1000eのPDF 使用マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge M1000e 44 ページ。 Expansion modules for dell networking switches
Dell PowerEdge M1000e にも: 更新マニュアル (44 ページ), 更新マニュアル (21 ページ), 更新マニュアル (14 ページ), インストレーション・マニュアル (7 ページ), スタートマニュアル (12 ページ), スタートマニュアル (12 ページ), 仕様 (3 ページ), スタートマニュアル (14 ページ), スタートマニュアル (12 ページ), はじめに (2 ページ), リファレンス・マニュアル (17 ページ)

Dell PowerEdge M1000e 使用マニュアル
Cabling Your Blade Cluster
Hardware
NOTE:
The cluster nodes represent the individual server modules in your Dell™
PowerEdge™ server enclosure. The designations namely, node 1 and node 2 and
the server enclosure are used for illustrative purposes only. The system and the
storage components in your cluster configuration may vary.
Cabling Your Cluster For Public and Private
Networks
The network interface cards (NICs) in the cluster nodes provide at least two
network connections for each node, as described in Table 2-1.
Table 2-1. Network Connections
Network
Connection
Public network
Private network
Figure 2-1 shows an example of network cabling for a PowerEdge M1000e
server enclosure in which dedicated NICs in each server module are internally
connected to each other through a Gigabit Ethernet switch module (for the
private network) and the remaining NICs are connected to the public
network
Description
• All connections to the client LAN.
• The public network must be configured for Mixed mode for
private network failover.
A dedicated connection for sharing cluster health and status
information only.

Cabling Your Blade Cluster Hardware

2
25