- ページ 19

サーバー Dell PowerEdge M520のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge M520 46 ページ。 Dell poweredge blade servers getting started guide
Dell PowerEdge M520 にも：情報更新 (38 ページ), リリースノート (27 ページ), マニュアル (25 ページ), ユーザーマニュアル (23 ページ), 重要事項説明書 (35 ページ), 更新マニュアル (32 ページ), 更新マニュアル (28 ページ), ユーザーマニュアル (26 ページ), ユーザーマニュアル (22 ページ), スタートマニュアル (12 ページ), テクニカル・マニュアル (45 ページ), ポートフォリオ・マニュアル (27 ページ), スタートマニュアル (14 ページ), スタートマニュアル (12 ページ)

Memory speed

The M520 server supports memory speeds of 1600MT/s, 1333MT/s, 1066MT/s and 800MT/s,

depending on the DIMM types installed and the configuration. All memory on all processors and

channels run at the same speed and voltage. By default, the system runs at the highest speed for the

channel with the lowest DIMM voltage and speed. The operating speed of the memory is also

determined by the maximum speed supported by the processor, the speed settings in the BIOS, and

the operating voltage of the system.

Table 8 lists the memory configuration and performance details for the M520, based on the

population of the number and type of DIMMs per memory channel.

DIMM

DIMM 0

type

UDIMM

RDIMM

*Although the M520 supports DIMM speeds of 800MT/s and 1066MT/s, you can only purchase this system with DIMM

speeds of 1333MT/s and 1600MT/s on Dell.com/PowerEdge.

RAS features help keep the system online and operational without significant impact to

performance, and can decrease data loss and crashing due to errors. RAS aids in rapid, accurate

diagnosis of faults which require service. Table 9 describes the memory RAS features supported on

the M520.

PowerEdge M520 Technical Guide

Table 8.

Memory speed capabilities

DIMM 1

DIMM 2

DIMMs

Speed (MT/s)

# of

800*

1066*

∞

1333

1600

∞