- ページ 18

サーバー Dell PowerEdge M620のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge M620 44 ページ。 Dell poweredge blade servers getting started guide
Dell PowerEdge M620 にも: 情報更新 (38 ページ), リリースノート (27 ページ), マニュアル (25 ページ), ユーザーマニュアル (23 ページ), 重要事項説明書 (35 ページ), 更新マニュアル (32 ページ), 更新マニュアル (28 ページ), ユーザーマニュアル (26 ページ), ユーザーマニュアル (22 ページ), スタートマニュアル (12 ページ), スタートマニュアル (12 ページ), テクニカル・マニュアル (46 ページ), テクニカル・マニュアル (49 ページ), ポートフォリオ・マニュアル (27 ページ), スタートマニュアル (14 ページ), スタートマニュアル (12 ページ)

Dell PowerEdge M620 テクニカル・マニュアル
16-DIMM capacity: uses a 97 mm heatsink to support the higher ambient temperatures of fresh
air configurations
The M620 supports a flexible memory configuration, according to the following basic rules:
Speed: If DIMMs of different speeds are mixed, all channels across all processors operate at the
slowest DIMM's common frequency.
DIMM type: Only one type of DIMM is allowed per system: UDIMM, RDIMM, or LRDIMM. These
types cannot be mixed.
The following additional memory-population guidelines also apply to the M620:
Up to two quad-rank (QR) DIMMs and up to three dual-rank (DR) or single-rank (SR) DIMMs may
be populated per channel.
DIMMs must be installed in each channel, starting with the DIMM farthest from the processor.
DIMMs should be installed with largest rank count to smallest. For example, if DR DIMMS are
mixed with SR DIMMs, DR DIMMS should be placed in the lowest DIMM slots, followed by the SR
DIMMs.
For more information on memory configuration and population, see the
Systems Owner's Manual
Memory speeds of 1600 MT/s, 1333 MT/s, 1066 MT/s, and 800 MT/s are supported on the M620,
depending on the DIMM types installed and the configuration. All memory on all processors and
channels run at the same speed and voltage. By default, the system runs at the highest speed for the
channel with the lowest DIMM voltage and speed. The operating speed of the memory is also
determined by the maximum speed supported by the processor, the speed settings in the BIOS, and
the operating voltage of the system.
Table 8 lists the memory configuration and performance details for the M620, based on the
population of the number and type of DIMMs per memory channel.
DIMM
DIMM 0
type
SR
DR
UDIMM
SR
SR
DR
SR
DR
QR
RDIMM
SR
SR
DR
QR
PowerEdge M620 Technical Guide
18
on Support.Dell.com/Manuals.
DIMM 1
DIMM 2
DIMMs
SR
DR
DR
SR
DR
DR
SR
Speed (MT/s)
# of
800
1066
1
1
2
2
2
1
1
1
2
2
2
2
Dell PowerEdge M620
1333
1600