- ページ 2

自動車アクセサリー Cradlepoint COR IBR600のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cradlepoint COR IBR600 12 ページ。 Integrated broadband router
Cradlepoint COR IBR600 にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), インストレーション・マニュアル (9 ページ)

4. Mount the router on the wall behind the WRN monitor. Use the bracket included with the

router, and 2 spare screws from the sign installation hardware kits. If the bracket is not

available, use zip ties to mount on the WRN wall plate

5. If the location does not have a WRN monitor, or the Cradlepoint needs to be located elsewhere

for reasons such as poor cell reception in the waiting room, you must notify PatientPoint and

get approval

6. For a standard install, a small wired network will be created – a schematic of a typical network is

shown below. Note that not all installs will have all the devices shown in the schematic

a. The dashed line in the network room represents a future connection linking the office's

network to the PPT network, at which time the Cradlepoint can be removed. This

connection will NOT be made when the CP is installed

b. Tech will need to make one or two short patch cables to connect the Cradlepoint in the

waiting room to the switch located there and the WRN cpu