- ページ 2
サーバー Dell PowerEdge R300のPDF Microsoft Windows Server 2008 インストールノートをオンラインで閲覧またはダウンロードできます。Dell PowerEdge R300 18 ページ。 Dependable space-saving server
Dell PowerEdge R300 にも： データシート (2 ページ)
ページを印刷する
2 Install the Windows 2003 operating system and then install the Service
Pack.
3 Enable the Demand-Based Power Management setting.
Restart the system.
a
Press <F2> during startup to enter the System Setup program.
b
From the Main screen, select CPU Information and press <Enter>
c
to open the CPU Information screen.
Select Demand-Based Power Management and press the right arrow
d
key to change the setting to Enabled.
Press <Esc>, save your changes, and exit the System Setup program
e
screen.
RAC Mode Support
When installing an optional Remote Access Controller (RAC) card in your
system, connecting the RAC card's MII cable to the system board is not
supported. As a result, the RAC card will not support shared or failover modes
with your system. The card can be configured only as a dedicated NIC port.
This is an update to your system's Hardware Owner's Manual. See your RAC
documentation for information on other remote access modes.
____________________
Information in this document is subject to change without notice.
© 2008 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Intel and Xeon are
registered trademarks of Intel Corporation in the U.S. and other countries; Microsoft, Windows, and
Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.