- ページ 9

サーバー Dell Precision R5400のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell Precision R5400 25 ページ。 Technical guide
Dell Precision R5400 にも：仕様 (2 ページ), パンフレット (2 ページ), マニュアル (13 ページ), テクニカル・マニュアル (36 ページ)

ページを印刷する

PCoIP Technology User Guide (Vol I)

Peer Identity parameters:

• Identify Peer by method (use IP address for

PCoIP Technology)

• Peer IP Address (other endpoint IP address)

• Peer MAC Address (other endpoint MAC

address)

Other session parameters:

• Enable Auto-Reconnect (will auto connect

when PCoIP Session lost)

• Session Timeout (timeout to drop session

when network is lost or severely congested)

Manual Configuration Example

This example shows manually configuring the

Host and Portal pair, i.e. without the use of a

Connection Management Server.

The following IP and MAC addresses are used

for this example:

• Host: IP Address: 192.168.0.20, MAC: 00-

19-D2-6F-EC-6C

• Portal: IP Address: 192.168.0.34, MAC:

6C-EC-6F-D2-19-00

Note: For a Peer-to-Peer direct connection, it is

required to know the IP and MAC addresses of

the Portal and Host.

Configure the Portal for peer-to-peer direct

connection:

1. Open the Portal Administration Web Interface

in a browser, e.g. https://192.168.0.34

2. Log in to the Portal Administration Web

Interface

3. Select the Connection Management

webpage from the Configuration menu

TER0806003 Issue 1

Figure 6: Connection Management

6. Ensure Enable Connection Management is

not selected

7. Select the Session webpage from the

Configuration menu

Figure 7: Session Webpage (Portal)

8. Select IP address next to Identify Peer by

9. Enter Host IP address in Peer IP Address,

e.g. 192.168.0.20

10. Enter Host MAC address in Peer MAC

Address, e.g. 00-19-D2-6F-EC-6C

11. Select Apply button to accept changes

Page 9 of 25