ページを印刷するSD/USB Controls
◄◄
/1
Rewind
►►
/3
Forward
I◄◄
/2
Fast Rewind Speed
►►I
/8
Fast Forward Speed
►II
/5
Play / Pause
OK
/0
Confirm Selection
■
/SWAP
Exit / Stop
remote control should not be dropped or damaged in any way .It should also
be kept dry and away from all heat sources.
2. Battery replacement is necessary when the
remote controller acts inconsistently or stops
operating the LCD display.
Choose the input source
If you hope to enjoy the picture from the external
input source ,before to select the source ,you
need to connect the devices, otherwise, when you
select the source ,the none or no signal will appears on the screen, Press
source button on the monitor or remote control, the menu appears on the
screen ,then press source to select the monitor item, and press" +/- (>)" to
ensure it
* Ensure the remote control is pointed
toward the remote control window on
the display. No obstacles should be
placed between the remote control and
the remote control window. The
effective receiving scope for the signal
is 3 meters to the front of the remote
control window.
1. To ensure a normal operation, the
VGA: the input source from VGA terminal output
HDMI1/2: the input source from HDMI1/2 in terminal output
AV1/2: the input source from AV1/2 or video camera terminal output
USB/SD：Monitor built-in multimedia decoder.
11
OSD setup
1. OSD setup under VGA input mode
Picture
Remark