- ページ 14

モニター Dell 1707FPV - UltraSharp - 17" LCD MonitorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell 1707FPV - UltraSharp - 17" LCD Monitor 48 ページ。 Flat panel monitor
Dell 1707FPV - UltraSharp - 17" LCD Monitor にも：セットアップマニュアル (2 ページ)

ページを印刷する

Setting Up Your Monitor: Dell™ 1907FPV Flat Panel Monitor User's Guide

OSD menu / select

Video input select

Down (-) and Up (+)

Auto Adjust

Power Button and Indicator

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those changes. The changes are also

saved if you change the settings and then wait for the OSD menu to disappear.

1. Push the MENU button to open the OSD menu and display the main menu.

file:///T|/htdocs/monitors/1907FPV/en/setup.htm[8/7/2012 10:06:54 AM]

Use the Input Select button to select between two different video signals that may be connected to your monitor.

NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot

sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll continually.

Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.

Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the

monitor self-adjusts to the current input:

Auto Adjustment

button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment,

you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached

cables.

Use the power button to turn the monitor on and off.

The green light indicates the monitor is on, and fully functional. An amber light indicates power save mode.

Auto Adjust In Progress